While a male RP-SMA can fit physically onto a female SMA socket, the two connectors do not connect electronically, and will not transmit a signal. The two connector types are indistinguishable when plugged in and the signal quality is the same. ![]() FCC regulations preventing attachment of non-standard antennas to wireless devices.įor example, while both female-type connector have threads on the outside of the connector, the SMA connector has a central socket barrel and the RP-SMA connector has a central pin.Ĭonversely, both male-type connectors have threads on the inside of the connector, the SMA connector has a central pin and the RP-SMA connector has a central socket barrel. This item TRENDnet Low Loss Reverse SMA Female to N-Type Male Weatherproof Connector Cable (8M, 26.2ft. This change is required so that WIMAC connections comply with U.S. This change is due to an RP-SMA antenna being designed to be incompatible with standard SMA connectors. Reverse Polarity connectors employ female contacts in the plug connector and male contacts in the jack connector. The 'RP' in RP-SMA stands for "Reverse Polarity" of the central connector, not the signal itself, since the 'polarity' or 'gender' of the central pin is reversed compared to an SMA connector. This is different from the more common SMA connectors used in other radio hardware. ![]() ProdataKey WIMAC-based hardware uses an antenna type known as RP=SMA. RP-SMA female connector has the same external housing as a standard female SMA connector, with the threads on the outside, however, the center receptacle.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |